Independent setup & troubleshootingHelping you find your connection.
The guide library

Tenda FH330

Tenda FH330 Wireless-N Router

Tenda FH330 setup guidance

Tenda FH330 Wireless-N Router

Tenda FH330 Wireless-N Router is a powerful device that provide upto 1200 mbps speed and with the bandwidth of 2.4 GHz band. Transfer rate up to 300 Mbp . The router support both WPA / WPA2 which adds to the network security .

Now would like to highlight the technical parameters of the device.

Wi-Fi standards: 802.11b / g / n

Frequency: 2.4 GHz

Wireless modes: AP, Router, WDS Repeater, WISP

Speed rate: 300 Mbps

Modulation: DSSS, OFDM

Channel width: 20 MHz, 40 MHz

Output Power: <20 dBm (EIRP)

Sensitivity: -87 dBm @ 11Mbps, -72 dBm @ 54Mbps, -68 dBm @ 270Mbps

Security: WPA-PSK, WPA2-PSK, MAC ACL, URL filtering

Control method: HTTP://tenda-wifi.com

Networking features: UPnP, SNTP, virtual server, DMZ host, DHCP server / client, WDS, WPS

QoS: 802.11e WMM

Interface: 1x WAN, 3x LAN, RESET / WPS button

Antenna: 4x 5 dBi, external, non-removable

Chipset: Broadcom BCM5357

Design: indoor, desktop, wall / ceiling mounting

Energy management: 9 V DC 1000 mA

Power consumption: 7 W

Weight: 400 g

Features of Tenda FH330 Wireless-N Router

Tenda FH330Wi-Fi router supports the 802.11n standard in the 2.4 GHz band, allowing communication at speeds of up to 300 Mbps when configured with four antennas. Real transmission speeds up to 95 Mbps. The new chipset comes with a “green Wi-Fi mode” that dynamically turns off chip components, reducing active power consumption. The device uses the features of a router, home Internet gateway, wireless access point, 3-port switch and firewall in one. The Tenda FH330 is suitable for both home and small business to share your ISP. The router has a WDS feature that allows you to connect two or more APs to extend the range of your wireless network. The Tenda FH330 is based on the “Easy to Use” password, which puts emphasis on the simplest setting possible. The Tenda FH330 supports the strongest WPA2-PSK security, the ability to disable SSID broadcasting, MAC address filtering, port forwarding and other standard networking features. Content filtering controls access to inappropriate websites. Equipped with four non-removable 5 DBI omni-directional antennas, the device delivers truly maximum range and wireless coverage. Password to enter router settings: admin, for newer firmware versions without password, just press OK. For related setup guidance, browse the networking FAQ library and verify the instructions against the exact device manual.

How to setup Tenda Router
Here is a whole information for setting up the Tenda router. If still you need help then visit Tenda official Website.
300 FAQs across our guide libraries

Quick answers

100 practical questions from Tenda WiFi Guides.

Browse all 100 FAQs
What should I check before relying on router parental controls?

Parental controls vary substantially between routers and service plans. Before purchasing, write down the behavior you need: a bedtime schedule, a category filter, a pause button or visibility into connected devices. These are different requirements, even when grouped under one menu name. Read which functions are included, which require an account or subscription and what remains after a trial ends. Confirm the features work in the intended router or access-point mode. TP-Link documents mode-dependent Deco features, while Tenda lists parental controls among supported RX2 Pro functions; neither label alone answers every household policy question.

Read the full guide and sources
Are PPPoE, Wi-Fi and router-administration passwords interchangeable?

A router installation can involve three different passwords. The ISP credential establishes the internet service, the Wi-Fi credential lets devices join the wireless network, and the router administrator credential protects configuration changes. Reusing the wrong one produces a failure at a different stage. When a setup wizard requests PPPoE details, use the account information supplied by the ISP. Tenda's setup guide explicitly separates that step from the wireless and management configuration. A password that successfully connects your phone to Wi-Fi is not evidence that it can authenticate the internet connection.

Read the full guide and sources
What should I inspect before buying a used router?

A used router can be economical when its hardware, ownership and support status are clear. Ask for the exact model and revision before agreeing on a price. A familiar product name can cover several different hardware versions with different firmware. Look up the manufacturer's support page and end-of-life information. Tenda's revision-specific downloads and ASUS's end-of-life list illustrate why model details matter. A clean case does not establish that security updates remain available.

Read the full guide and sources
What should I compare on Tenda TE3L and TE6L Pro ports?

For these two Tenda models, the useful starting point is your wiring diagram. Both belong to the dual-band Wi-Fi 7 category, but their Ethernet arrangements differ. Count the internet connection and every wired device before deciding which model fits. Tenda lists three gigabit WAN/LAN interfaces for TE3L v1.0. The TE6L Pro specification lists one 2.5 Gbps interface and three gigabit interfaces. Confirm the exact regional hardware sold to you because the similar case design does not establish identical capabilities.

Read the full guide and sources
Independent. Practical. Clear.

Tenda WiFi Guides is an independent information website. We are not affiliated with or endorsed by Tenda. Product names belong to their respective owners.